Part: MEGA450-C	Chromed Mega 450	Price: $614.95	Weight: 3 lbs.
Once again, at your request, we have chromed and screen printed our Mega 450 Delay Box. Click if you would like to read about all the features and specs.
Part: SW-L	Leather Alpha D	Price: $174.99	Weight: 4 lbs.
Would you like to add the Chrome 4 button bracket for $34.99? No Thanks Chrome Button Bracket $34.99 Black Leather Alpha D Indy dragster Steering Wheel. IN STOCK. Your dragster will stand out with this VERY HARD TO FIND 10" (.255MM ) steering wheel. Features genuine thick black leather and unmatched quality that you have to feel to appreciate. Easily attaches to new or older dragsters. Limited quanities available. OPTIONS (As shown in photo): 4 push button CHROME bracket, contoured to mount in front (pictured) or behind steering wheel for optimum button comfort. Click for photo of bracket mounted behind the steering wheel Photo also shows two Oversized Mushroom Buttons with cord - #MUSHO in the top holes, and two Snap Action Buttons with cord - #TBB-SA mounted in the bottom locations.
Part: BRP-SCP-3C	Chrome 3” Scoop tray	Price: $249.99 279.99	Weight: 6 lbs.
$279.99 $249.99 for a LIMITED TIME ONLY ! IN STOCK AND READY TO SHIP! Dress up your investment with our NEW TRIPLE CHROMED 3” SCOOP MOUNT TRAY FOR DRAGSTERS. Will fit the most popular hood scoops including all Harwood Scoops with outside dimensions of 21-3/4" x 13-9/16".. Made from Billet aluminum and CNC manufactured for exact precision. Strong welds insures zero flex! Designed to fit both dominator or standard carbs. (adapter plate kits are available, sold separately). To view our entire Hood Scoop accessory page, click here.
Part: BRP-SCP-DOM-C	Chrome Dominator Scoop Mount Kit	Price: $144.99	Weight: 3 lbs.
Professionally chromed scoop tray mounting plate kit that mounts between carburetor base and intake manifold to support scoop mount tray. This application is for the Dominator 4500 series carbs. Standard Carb applications are not available at this time.
Part: GZR-1225-C	Chrome T/S Bracket for Scoop Tray	Price: $94.99	Weight: 2 lbs.
Chrome throttle stop bracket for our own scoop traysand the "Goza" Scoop Tray. This bracket fits all throttle stops except the standard PCTS. The length of this bracket is 13-1/2". Please measure to see if this will fit your application.
Part: GZR-1220-C	Chrome Cable Bracket	Price: $52.99	Weight: 1 lbs.
Professionally chromed throttle cable bracket, for use with Morse application cables. Includes hardware for mounting.
Part: MEGADIAL-C	4 Digit Chrome Board & Control	Price: $409.99	Weight: 4 lbs.
Would you rather have Green LED's for $50 more? No Thanks Green LED's $50.00 This is the same as the standard "MEGADIAL", except it is professionally chromed, and has a startling mirror finish. Photo Shows standard red LED chrome display board mounted on a Chrome Dial Board Bracket (Not included, sold separately). The display board was designed for use with the Dial Board Brackets, but will fit inside any bracket that is 7.5” wide. Or, it can be fastened to a window or on plexiglass with Velcro strips. Click to read Control Head Specs, and Close up Photo of Control Head or Display Board Specs
Part: BRP-DB-3-C	Biondo Chrome Dial Brkt for 3" tray	Price: $149.99	Weight: 3 lbs.
Same as Aluminum Dial Board Brackets, except professionally chromed, and has a startling mirror finish - Biondo Racing Billet Aluminum Dial Board Mounting Bracket for 3" Scoop Trays. Will work perfect with the "MEGADIAL", and the "Flip Style" Dial Boards.
Part: FMC	Chromed Flat Mount Clamp	Price: $44.99	Weight: 1 lbs.
CHROMED Legal bottle clamp mounts our CO2 bottle clamp to any flat surface. Only one is required. To see all our bottle kits, and accessories, click here.
Part: BE-C	Empty 3/4 LB Spare Bottle (Chromed)	Price: $114.99	Weight: 3 lbs.
CHROMED Empty 10 Oz. CO2 Bottle
Part: BC2.5-C	Chrome 2.5LB Bottle Clamp	Price: $99.99	Weight: 2 lbs.
Legal bottle clamp will safely secure our 2.5 pound CO2 bottle to a 1-1/2" roll bar. CHROMED for a great look. Only one is required. Can also be used as a flat mount clamp by removing the bottom piece.
Part: B2.5-C	Chromed Empty 2.5 LB Bottle	Price: $159.99	Weight: 5 lbs.
CHROMED Empty 2.5 Pound CO2 "Big" Bottle
Part: PB-ELECSOL-C	Electric Sol for B&M Pro Bandit - chrome	Price: $169.99	Weight: 2 lbs.
There are times when we sell shifters, and customers want to change the solenoid they have on it. Sometimes they would rather have CO2 over Electric, and other times they would rather have Electric over CO2. For that reason we sell this Electric Solenoid Kit. This solenoid works on the B&M Pro Bandit. Kit comes with the electric solenoid, and relay. To see all of our electric solenoids, and shifters, click here.
Part: VC-CHEVYBB-W-C2	BB-Chevy Chrome Valve Covers	Price: $299.99 449.99	Weight: 10 lbs.
THESE ARE NEW!! - Take advantage of this great offer and save. We have limited sets of our professionally chromed Big Block Chevy Valve Covers in stock that have slight marks in them. Most of the time, these marks are barely noticeable. Most people that get a set of these call back for another set. Satisfaction Guaranteed or your money back! We are selling them at a never before seen price of 299.99! ! For use with all Big Block Chevy applications, including DART Heads. Description Big Block Chevrolet fabricated aluminum valve covers. The covers are professionally chromed, and have a startling mirror finish. These trick fabricated valve covers that are precision machined from light weight 6061 T-6 billet aluminum. CNC Tru-Flat™ 5/16" rails (billet rails) insure no oil leaks and an air tight seal for maximum vacuum retention. Precision welds insure a distortion-free fit. Fabricated entirely from one-piece superior quality aluminum, ultra-lightweight. The covers are polished to resist oil staining. They are tall enough to clear all rocker combinations including stud girdles and shaft rockers. The valve cover stud kits with tool are included with each set to help maintain gasket-rail flatness and to prevent leaks. The holes for breathers, relief valves, or bungs are not pre-drilled. Similar valve covers made are sold for over $600. Made in the USA. Gaskets, Bungs, and Relief Valves are available, but not included.
Part: VC-CHEVYBB-W-C	BB-Chevy Billet VC - Chromed	Price: $449.99	Weight: 10 lbs.
For use with all Big Block Chevy applications, including DART Heads. Professionally chromed valve covers, that have a startling mirror finish. These trick fabricated valve covers that are precision machined from light weight 6061 T-6 billet aluminum. CNC Tru-Flat™ 5/16" rails (billet rails) insure no oil leaks and an air tight seal for maximum vacuum retention. Precision welds insure a distortion-free fit. Fabricated entirely from one-piece superior quality aluminum, ultra-lightweight. They are tall enough to clear all rocker combinations including stud girdles and shaft rockers. The valve cover stud kits with tool are included with each set to help maintain gasket-rail flatness and to prevent leaks. The holes for breathers, relief valves, or bungs are not pre-drilled. Similar valve covers made are sold for over $600. Made in the USA. Gaskets, Bungs, and Relief Valves are available, but not included.
Part: VC-CHEVYSB-C	SB-Chevy Billet VC - Chromed	Price: $449.99	Weight: 7 lbs.
Small Block Chevy application, professionally chromed with a startling mirror finish. The valve cover stud kits with tool are included with each set to help maintain gasket-rail flatness and to prevent leaks. The holes for breathers, relief valves, or bungs are not pre-drilled. Similar valve covers made are sold for over $600. Made in the USA. Gaskets, Bungs, and Relief Valves are available, but not included.
Part: VC-BIGCHIEF-C	Big Chief Billet VC - Chromed	Price: $449.99	Weight: 9 lbs.
Big Chief application, professionally chromed with a startling mirror finish. The valve cover stud kits with tool are included with each set to help maintain gasket-rail flatness and to prevent leaks. The holes for breathers, relief valves, or bungs are not pre-drilled. Similar valve covers made are sold for over $600. Made in the USA. Bungs, and Relief Valves are available, but not included.
Part: OSA-C	Outlaw Shifter Chrome	Price: $399.99	Weight: 6 lbs.
Be sure to select your Cable Size before ordering: Select Size 6 Foot Cable 11 Foot Cable NEW!! CHROME FINISH! 100% RACE READY! Due to the huge demand for Phantom Shifters, Biondo Racing decided to develop our own line of shifters, called the OUTLAW. The OUTLAW uses the exact same high quality components, and mounting pattern as the Phantom, and are finished in CHROME. We guarantee you will be satisfied with! In fact, if you are not completely satisfied with this shifter, you can send it back for a full refund! For more details on this shifter, click here, or click to see the Outlaw with Built In Button, or Outlaw Electric Solenoid Version or Outlaw Electric Solenoid Version with Button.