(Also available in CHROME for $80 more.) Biondo Racing has this NEW LED display dial board called the “MEGA DIAL”. You can avoid dial-in errors, and have the option to change your dial-in, right up to the last second. The “MEGA Dial” is the newest generation of Dial in Boards sold at close to ½ the price of some of our competitors. We also have the only board with the “LOCK” feature, which will lock the dial value in memory. You can now avoid changing a dial-in by mistakenly hitting the Control Box. A benefit of the MEGA DIAL’s design over our competitors is a very low current draw, so it can be connected to the master switch with no concern of having to turn it off between rounds. It draws less than ½ amp in when set to bright, and less than ¼ amp when set to dim. Some of competitor boards can draw up to 6 amps. The “MEGA DIAL” has the ability to store two times in memory, called “Time 1” and “Time 2”, allowing for large number changes without a lot of time wasted scrolling. This can be beneficial for ¼ mile and 1/8 mile racers, they can store 2 different dial ins, or a driver who “super” class races can store his “super” dial in, and his bracket dial in. The “MEGA DIAL” is a two piece unit, and both the Control Head and the Display Board require 12v or 16v power and ground to operate. (also included is a 14’ telephone cord that is used to send information between the two units.). The Control Head is typically placed near the driver, and the Display Board is mounted to face the tower. This is independent and works alongside any delay box, throttle stop, or ignition. Photo shows display board mounted on a Dial Board Bracket (Not included, sold separately). The display board was designed for use with the Dial Board Brackets shown below, but will fit inside any bracket that is 7.5” wide. Or, it can be fastened to a window or on plexiglass with Velcro strips. Click to read Control Head Specs, and Close up Photo of Control Head or Display Board Specs
This is the same as above, except it is professionally chromed, and has a startling mirror finish.
Photo Shows standard red LED chrome display board mounted on a Chrome Dial Board Bracket (Not included, sold separately). The display board was designed for use with the Dial Board Brackets shown below, but will fit inside any bracket that is 7.5” wide. Or, it can be fastened to a window or on plexiglass with Velcro strips.
Click to read Click to read Control Head Specs, and Close up Photo of Control Head or Display Board Specs
