One important item most people order with this is the E-Z Slide Tether (click to read more). Also, with the use of this device, you can no longer use the neck collar, so you may need to purchase a helmet skirt, or Head Sock (We recommend the sock over the skirt).
This is an option called the E-Z Slide, and it offers more mobility over the standard tether sliding system included with the Hybrid Pro, and Pro Rage. It is available in different lengths, and is usually purchased after a customer receives his restraint and adjusts. Once the original tether is adjusted, you can measure for the E-Z Slide by measuring your original tether from end to end of the webbing, with the tether laid flat. This measurement minus 2" will give the same head movement while providing freedom to turn your head. Most popular sizes for this is 14" for the majority of customers fitted for this option.
This is an option called the E-Z Slide, and it offers more mobility over the standard tether sliding system included with the R3 Rage. It is available in different lengths, and is usually purchased after a customer receives his restraint and adjusts. Once the original tether is adjusted, you can measure for the E-Z Slide by measuring your original tether from end to end of the webbing, with the tether laid flat. This measurement minus 2" will give the same head movement while providing freedom to turn your head. Most popular sizes for this is 14" for the majority of customers fitted for this option.
This is the E-Z Slide for the Hybrid Pro, and Pro Rage, with the M61 ends installed, (but anchors are not included). This offers more mobility, and provides more freedom to turn your head over the standard tether sliding system included with the Hybrid Pro, and Pro Rage. It is available in different lengths, and is usually purchased after a customer receives his restraint and adjusts. Once the original tether is adjusted, you can measure for the E-Z Slide by measuring your original tether from end to end of the webbing, with the tether laid flat. This measurement you get will be the measurement you need to order. Since this is the E-Z slide for the M61 anchors there is not adding or deducting for the proper measurement.
This is the E-Z Slide for the R3 Rage, with the M61 ends installed, (but anchors are not included). This offers more mobility, and provides more freedom to turn your head over the standard tether sliding system included with the R3 Rage. It is available in different lengths, and is usually purchased after a customer receives his restraint and adjusts. Once the original tether is adjusted, you can measure for the E-Z Slide by measuring your original tether from end to end of the webbing, with the tether laid flat. This measurement you get will be the measurement you need to order. Since this is the E-Z slide for the M61 anchors there is not adding or deducting for the proper measurement.
This is the E-Z Slide for the Hybrid Pro, and Pro Rage, with the M61 ends installed, (anchors are included). This offers more mobility, and provides more freedom to turn your head over the standard tether sliding system included with the Hybrid Pro, and Pro Rage. It is available in different lengths, and is usually purchased after a customer receives his restraint and adjusts. Once the original tether is adjusted, you can measure for the E-Z Slide by measuring your original tether from end to end of the webbing, with the tether laid flat. This measurement you get will be the measurement you need to order. Since this is the E-Z slide for the M61 anchors there is not adding or deducting for the proper measurement.
This is the E-Z Slide for the R3 Rage, with the M61 ends installed, (anchors are included). This offers more mobility, and provides more freedom to turn your head over the standard tether sliding system included with the R3 Rage. It is available in different lengths, and is usually purchased after a customer receives his restraint and adjusts. Once the original tether is adjusted, you can measure for the E-Z Slide by measuring your original tether from end to end of the webbing, with the tether laid flat. This measurement you get will be the measurement you need to order. Since this is the E-Z slide for the M61 anchors there is not adding or deducting for the proper measurement.
