FREE UPS GROUND SERVICE
Free shipping for ordering online or mentioning the site.
For orders only, phone toll-free at 800-332-1320.
(For all orders over $75, shipped to the continental U.S.)
HOME
SHOP BIONDO RACING'S ON-LINE STORE
FAST PRODUCT SEARCH
SHOPPING CART
CONTACT US
NEW STUFF
MONTHLY SPECIALS
COMBO PACKAGES
 QUALITY USED PRODUCTS
 DISCOUNTED DELAY BOXES
 
Part: ASV_B

ASV with Free Bottle (Empty)

Price: $129.99 Weight:
5 lbs.
Buy the Auto Shutdown Valve now, and get an empty 10 oz CO2 Bottle for FREE.

Since we have heard many times about racers forgetting to turn their air bottle on, and in turn losing a round, we decided to search for a product to prevent that occurrence. Well, here it is, the CO2 "Automatic Shutdown Valve". You can hook this up to your ignition switch, and never have to turn the bottle on or off again. This system mounts easily between your bottle and regulator, and the solenoid can withstand up to 3000 lbs of pressure. 12v and 16v compatible.

 
Part: ALT

1 Wire Mini-Alternator

Price: $159.99 Weight:
10 lbs.
With all the electronics in today's race cars, an alternator is almost mandatory to keep your battery fully charged from start to finish. This Mini Alternator was designed to put out a high and quick rate of charge at low RPM's. A simple one-wire unit has an output of 74 amps and is capable of putting out 50 amps at 2200 rpm, and begins charging as low as an idle.

We also have bracket kits available, these will make installation of the alternator simple, safe, and professional. Brackets are anodized black and come complete with hardware and instructions.


People who buy this part also buy Bracket Kit for Small-Block Chevy

People who buy this part also buy Bracket Kit for Big-Block Chevy


 
Part: BB

BB Chevy Alternator Brkt

Price: $65.99 Weight:
2 lbs.
Alternator Bracket Kit for Big Block Chevy. This kit these will make installation of the alternator simple, safe, and professional. Brackets are anodized black and come complete with hardware and instructions.

(This item may require some modifications.)

 
Part: CPBB

BB Chevy Crankshaft Pulley

Price: $35.99 Weight:
1.5 lbs.
Crankshaft Pulley for Big Block Chevy, belt not included.
 
Part: CPSB

SB Chevy Crankshaft Pulley

Price: $32.99 Weight:
1.5 lbs.
Crankshaft Pulley for Small Block Chevy, belt not included.
 
Part: ST-CHEVY-3HP

3.5 HP High Torque Mini Starter (Chevy)

Price: $189.99 199.99 Weight:
12 lbs.
100% NEW - NOT REBUILT!!

Biondo Racing's 3.5 Horsepower starter.
  • Good on low and high compression engines
  • Full ball bearing construction, NOT bushings.
  • 3.75 to 1 gear reduction, this translates to 50% more torque than an OEM starter.
  • Clears all headers
  • Clears oil pans where the OEM Starter will work
  • Shims and bolts included.

    As good as a Tilton, or your money back!

  •  
    Part: QDT

    Quick Disconnect Trans Fittings

    Price: $69.99 Weight:
    1 lbs.
    Biondo Racing is selling these Quick Disconnect Trans Fittings to make a transmission change easier than ever. The kit includes high pressure aircraft style, quick disconnect couplings that you install in-line with your existing trans lines. Also included are two #6 line - to 1/8" pipe fittings, two - 1/8", 45 degree pipe fittings, with teflon already applied. All this at an unmatched price!
     
    Part: RPM-1SHIFT

    RPM Switch - 1 setting

    Price: $139.99 Weight:
    1 lbs.

    Single RPM Setting Activated Switch:

    Face Size: 4" x 3-1/4" x 3/4"
    Overall Size: 5-3/8" x 3-1/4" x 3/4"

    Features / Specs:

  • Auto Reset - No buttons to press!
  • Shifts one or two gears at the same RPM
  • Mounting tabs for easy installation
  • Microprocessor controlled timing
  • Retains all numbers when powered off
  • Large LCD (Liquid Crystal Display)
  • Works with 4, 5, 6, 8, 10, 12 cylinder engines
  • 3000 - 9900 RPM Range that can be change by pushing the buttons on the face of the unit
  • Test Feature - Test your shifts by holding down either button for 2 seconds
  • Two Separate outputs - Normally open, and closed. (For CO2, Air, or Electric shift applications)
  • Programmable Repeat Feature - Unit can be programmed so it won't activate again at the finish line. This will save air for vehicles using air, or CO2 shifters.
  •  
    Part: RPM-2SHIFT

    RPM Switch - 2 settings

    Price: $159.99 Weight:
    1 lbs.

    Double Shift RPM Activated Switch:

    Face Size: 4" x 3-1/4" x 3/4"
    Overall Size: 5-3/8" x 3-1/4" x 3/4"

    Features / Specs:

  • Auto Reset - No buttons to press!
  • Shifts two gears at the same or different RPM
  • Mounting tabs for easy installation
  • Microprocessor controlled timing
  • Retains all numbers when powered off
  • Large LCD (Liquid Crystal Display)
  • Works with 4, 5, 6, 8, 10, 12 cylinder engines
  • 3000 - 9900 RPM Range that can be change by pushing the buttons on the face of the unit
  • Test Feature - Test your shifts by holding down either button for 2 seconds
  • Two Separate outputs - Normally open, and closed. (For CO2, Air, or Electric shift applications)
  • Programmable Repeat Feature - Unit can be programmed so it won't activate again at the finish line. This will save air for vehicles using air, or CO2 shifters.
  •  
    Part: DDTEST

    Digital Delay's Tester

    Price: $149.99 Weight:
    1 lbs.
    Digital Delay's Digital Tester
     
    Part: RPM

    RPM Control

    Price: $89.99 Weight:
    0.6 lbs.
    Biondo Racing made changing starting line RPM or any other RPM as easy as the push of a button. The Digital RPM Control simply replaces a chip and offers a range of adjustabilty from 0 - 10,000 RPM. So, if you are tired of loaning & losing your chips, and you would like the abilty to adjust your RPM in 100 rpm increments, this is for you. It comes with a long lead so it can be within your reach when you are all strapped in.

    Perfect for linelock users - where a very low starting line RPM is desired.

     
    Part: RPM2

    RPM Control w/2-Step

    Price: $119.99 Weight:
    0.6 lbs.
    All the features of our Digital RPM Control (Part #RPM), with a built in 2-step. The RPM2 has 2 modules, while 1 module is adjusted by a push button thumbwheel, a chip receptacle is used to control module 2 (the high side). This unit plugs directly into MSD 7AL, 6AL or a soft touch.
     
    Part: LL

    Linelock - Rebuildable, Moroso Style

    Price: $39.99 Weight:
    1.5 lbs.
    $49.99 SALE $39.99
    Biondo Racing's Linelock / Roll Control has unsurpassed holding power which guarantees to keep you in the water for a thorough burnout every time. Check out these features and you will see what sets it apart from the rest. Check out the price on the best selling Lineloc / Roll Control and you won't believe your eyes!
  • completely rebuildable solenoid
  • designed to operate under extreme heat for optimum durability
  • built in mounting tabs
  • hi-flow inlet / oulet ports
  • withstands 3,000 psi line pressure
  • each unit is individually tseted and backed by a 1 year warranty.


    People who buy this part also purchase Part LLK which is sold separately. It includes a heavy duty pushbutton switch, indicator light, and a fuse with an in-line holder.

  •  
    Part: LLK

    LL Accessory kit

    Price: $24.99 Weight:
    0.1 lbs.
    New and improved Linelock Accessory kit, with easy mount actuator button..

    This is what you need to wire up your linelock. This kit includes our NEW Linelock Activation Switch. Also included are an inline fuse holder, fuse, and indicator light.

     
    Part: LL-BUTTON

    LL Activation Switch

    Price: $19.99 Weight:
    0.2 lbs.
    Our NEW Linelock Activation Switch. This switch has a built in 10 amp microswitch and a nice positive feel red actuator for a smooth release. Includes close to two feet of wire for easy installation. Also built in to the switch is a rubber mounting band that makes mounting to a shifter handle a breeze.
     
    Part: P

    Quick Cool Pulley

    Price: $17.99 Weight:
    0.2 lbs.
    Replace your existing water pump pulley with The Cool Pulley and you will see a change in your water temperature after a run. The cool pulley has 14 teeth instead of the standard pulley's 10, and therefore it can cool 40% faster. It's polished finish dresses up any engine compartment. The cool pulley will fit on any Mr. Gasket or Moroso Pump. (No need to change belt, in most cases.)
     


     Home | Info on our Delay Boxes, 2006 reminder and the 2003 ruling | Files And Product Manuals
    Product Search | Our Race Team and 2008 Plans | The Biondo Guarantee
    Company History | Racing Tips / FAQ | Classified Ad Section | Photo Gallery | Links
     
    Copyright © Biondo Racing Products, Inc All Rights Reserved.