Here is a detailed description of the "Weather Center":

NHRA & IHRA Contingency item!
Motor sports most accurate and only patented weather station the PerformAIRE air quality computer is now available as a trailer mounted version -The PerformAIRE WEATHER CENTER. This system uses a remote sensor housing that can be located outside the trailer in the open air. The sensor housing is an aluminum white powder coated extrusion. Dual internal fans keeps fresh air moving though the housing for accurate air measurements. The Control Console can be mounted inside the trailer where run and weather data can be entered and monitored using a data entry keypad and backlit LCD display.

*****NEW feature (at your request); WATER GRAINS*****
The PerformAIRE WEATHER CENTER monitors the Temperature, Absolute Barometric Pressure, Relative Humidity, Vapor Pressure, Dew Point, WATER GRAINS, % Oxygen (Optional), Wind Speed, Wind Gust, and Wind Direction (all optional) through its state of the art electronic sensors. This information is transmitted into a microprocessor where density altitude, oxygen altitude, and predicted values are calculated and displayed to incredible accuracy through exact scientific equations formulated specifically for internal combustion engines (verified by authorities in atmospheric research).

Without the need of having a personal computer in your trailer the PerformAIRE WEATHER CENTER can send complete weather and prediction information to you anywhere at the track, including the staging lanes! Multiple pagers can be ran off the system and predictions can be sent for multiple cars. Paging range is 1 mile (minimum). There are also no service fees. This is a stand alone system!

The PerformAIRE WEATHER CENTER contains a data base that allows for storage of runs and then uses this data to automatically predict ETs, Throttle Stop Settings, Jet Sizes, etc. The predicted values are continually updated with each new sample of air. The density altitude and oxygen altitude will automatically be stored with each run if an oxygen sensor has been installed. The stored runs are also tagged with a time and date stamp to allow for later referencing. The expandable data base is capable of storing hundreds of runs and will allow those runs to be stored in separate data bases, which can be labeled for specific cars or tracks. A Personal Computer is NOT needed. "Altalab's Altacom II Weather System":

PRICES TOO LOW TO ADVERTISE!! This item can not be ordered on line, Please call Sal, Pete, or Richie for pricing and ordering at 732-683-0404. We have a LOW package price on the "Altacom II", complete with a magnetic mount antenna , and the most popular options, which are the Paging option (with one pager), and the Wind Monitoring Option, (as shown in photo). For easy reference our Part Number on the complete package is #AC2L-W. And yes, since many people ask...This unit does provide

Other Available Options and / or add-ons:

Here is a detailed description of the "ALTACOM II With Wind" (Part #AC2L-W):
AltaCom II is designed for superior in-field operation. From sensor specifications and board design, to the remote sensing, paging functions, and software, every choice has been made to provide you with stable, accurate readings you can rely on. All that is included in the package price.

AltaCom II is an excellent weatherstation for tuning, racing and dyno work. The fan-aspirated remote sensor housing can be mounted above the trailer roof or in the plenum. The remote cable permits flexible setup, with the console located for convenient viewing. The LCD on the console updates every 20 seconds. The console logs data to internal memory, and can be connected to a PC with the included serial cable for downloading and live data display on screen.

AltaCom II can function as a stand alone weather station, but added functionality is available through your PC. Merlin Windows software provides communications between the weatherstation and your computer, and has powerful tools for drag racing predictions:

CLICK HERE for more features and specs on the Altacom II.

Part: VC-CHEVYBB-W-BLEM	BB-Chevy Billet Valve Covers (blem)	Price: $189.99 249.99	Weight: 10 lbs.
THESE ARE NEW!! - Take advantage of this great offer and save. We have limited sets of our Big Block Chevy Valve Covers in stock that have slight marks in them. Most of the time, these marks are barely noticeable. Most people that get a set of these call back for another set. Satisfaction Guaranteed or your money back! We are selling them at a never before seen price of 189.99! ! For use with all Big Block Chevy applications, including DART Heads. Description Big Block Chevrolet fabricated aluminum valve covers. These trick fabricated valve covers that are precision machined from light weight 6061 T-6 billet aluminum. CNC Tru-Flat™ 5/16" rails (billet rails) insure no oil leaks and an air tight seal for maximum vacuum retention. Precision welds insure a distortion-free fit. Fabricated entirely from one-piece superior quality aluminum, ultra-lightweight. The covers are polished to resist oil staining. They are tall enough to clear all rocker combinations including stud girdles and shaft rockers. The valve cover stud kits with tool are included with each set to help maintain gasket-rail flatness and to prevent leaks. The holes for breathers, relief valves, or bungs are not pre-drilled. Made in the USA. Gaskets, Bungs, and Relief Valves are available, but not included.
Part: VC-CHEVYBB-W-C2	BB-Chevy Chrome Valve Covers	Price: $299.99 449.99	Weight: 10 lbs.
THESE ARE NEW!! - Take advantage of this great offer and save. We have limited sets of our professionally chromed Big Block Chevy Valve Covers in stock that have slight marks in them. Most of the time, these marks are barely noticeable. Most people that get a set of these call back for another set. Satisfaction Guaranteed or your money back! We are selling them at a never before seen price of 299.99! ! For use with all Big Block Chevy applications, including DART Heads. Description Big Block Chevrolet fabricated aluminum valve covers. The covers are professionally chromed, and have a startling mirror finish. These trick fabricated valve covers that are precision machined from light weight 6061 T-6 billet aluminum. CNC Tru-Flat™ 5/16" rails (billet rails) insure no oil leaks and an air tight seal for maximum vacuum retention. Precision welds insure a distortion-free fit. Fabricated entirely from one-piece superior quality aluminum, ultra-lightweight. The covers are polished to resist oil staining. They are tall enough to clear all rocker combinations including stud girdles and shaft rockers. The valve cover stud kits with tool are included with each set to help maintain gasket-rail flatness and to prevent leaks. The holes for breathers, relief valves, or bungs are not pre-drilled. Similar valve covers made are sold for over $600. Made in the USA. Gaskets, Bungs, and Relief Valves are available, but not included.
Part: FR3	Final Round 3 P/T	Price: $199.99	Weight: 5 lbs.
If you would like to view more details on the Final Round 3, or to view all of our Practice Trees Click Here.
Part: LL	Linelock - Rebuildable, Moroso Style	Price: $39.99	Weight: 1.5 lbs.
$49.99 SALE $39.99 Biondo Racing's Linelock / Roll Control has unsurpassed holding power which guarantees to keep you in the water for a thorough burnout every time. Check out these features and you will see what sets it apart from the rest. Check out the price on the best selling Lineloc / Roll Control and you won't believe your eyes! completely rebuildable solenoid designed to operate under extreme heat for optimum durability built in mounting tabs hi-flow inlet / oulet ports withstands 3,000 psi line pressure each unit is individually tseted and backed by a 1 year warranty. People who buy this part also purchase Part LLK which is sold separately. It includes a heavy duty pushbutton switch, indicator light, and a fuse with an in-line holder.
Part: LL_CASE	Case of 20 LL	Price: $599.99	Weight: 33 lbs.
Case of our Linelock Solenoids Quantity of 20. Units are new, they will be in one carton, the 20 linelocks will not be individually boxed. One set of instructions will be included. Price comes to $29.99 each!!
Part: PA2_PA2-CASE	PA2 & PA2 CASE	Price: $409.99	Weight: 5 lbs.
Combo package on Performaire Weather Station (Part #PA-2) and Performaire Carrying Case (Part #PA2-CASE)
Part: PAE	Performaire "Eclipse"	Price: $569.99	Weight: 4 lbs.
WEB SPECIAL!! $569.99 NEW FEATURE (at your request) : WATER GRAINS NHRA & IHRA Contingency item! The newest model to the PerformAIRE lineup is the PerformAIRE "ECLIPSE". This state of the art handheld model features an internal fan aspirated "sensor tunnel" that allows air to flow directly across the sensors for accurate and ultra quick weather readings, even in direct sunlight! A great deal on the Performaire "Eclipse" weather station, if you would like to read more of the detailed features, and be redirected to the complete weather station page, Click Here.
Part: QS	Qtr Stick Forward Kit	Price: $79.99	Weight: 2 lbs.
$100 ON SALE $79.99 Quarter Stick CO2 Shifter Kit, for forward pattern powerglides, 1-2 shift. People who buy this part also buy a bottle kit: BK80 and bottle clamp:BC or BCR or FMR and an RPM Activator Switch: Multi Switch or 8950
Part: ASV_B	ASV with Free Bottle (Empty)	Price: $129.99	Weight: 5 lbs.
Buy the Auto Shutdown Valve now, and get an empty 10 oz CO2 Bottle for FREE. Since we have heard many times about racers forgetting to turn their air bottle on, and in turn losing a round, we decided to search for a product to prevent that occurrence. Well, here it is, the CO2 "Automatic Shutdown Valve". You can hook this up to your ignition switch, and never have to turn the bottle on or off again. This system mounts easily between your bottle and regulator, and the solenoid can withstand up to 3000 lbs of pressure. 12v and 16v compatible.