CLASSIFED CAR ADS brought to you by

Place your classified car ad with photo here for only $15. E-mail the webmaster with your ad description, and a photo in any format. Along with that, leave a daytime and evening phone number, so we can call you to arrange payment for the ad. We will put all the info you want in the ad, including an e-mail address. The ad will run until you sell the car.

2007 RaceTech Mono- shock Dragster:
Racetech 235” Mono- shock Dragster, built in late 2007. Deadly consistent (will provide logbook). Multi-time big buck bracket race winner. 582 All Aluminum PAR BBC. Best parts money can buy throughout. ATI Superglide transmission and 9" converter, complete Racepak dash and data acquisition system. Lots of chrome, click here to see the cockpit, including chrome Mega 450, Chrome "Mega Panel with built in digital dial control, Chrome Dial Board, Chrome shifter, Chrome valve covers and polished headers. Rupert Alky 1250 carb, MSD digital 7530T, throttle stop starting line control, Nitrous, powdercoated wheels. Dragster has under 500 runs and motor was recently freshened. Brand new lifters and valve springs. Carbon fiber wing included. Runs 7.30 @ 183 (detuned for bracket racing, capable of 7 teens without nitrous.)

Ralph Landolfi's 1969 Stock Eliminator Camaro:
Car runs B/SA. The 396 / 375 Horsepower motor was built by Brian Tilberg. ATI converter and trans. "Wee Bee" front. Calvert rear. The car was a bare metal repaint. It has run 1.36 in 60', and the quarter in 10.42 @ 125.67. The car is race ready! For photos Click here to be redirected to another website.

To Duplicate this car NEW would cost $44,650 rolling. Buy this one with less than 100 runs is priced at $ 32,500 rolling! If you desire to buy it as a turnkey car, with less than 60 passes on the motor, 555 C.I. BB Chevy built by Gill Davis Racing Engines. The motor features a Dart block and Dart 355 CNC Big Block Heads done by Slawako w/Rupert 1250 alcohol dominator, Edelbrock intake,Jessel, valve train, Manley NexTex Triple Springs Jessel timing Belt, Callies Crank, Manly Rods, Moroso Billet oil pump, Chrome Valve covers, This motor went best of 4.86 / 7.62 at 175 MPH at the November Florida swing. East Coast 16V alternator, Trans, Deadenbear case, Vasco input, 8 disc clutch pack all the best parts built by “Joey D” Transmissions with B&M #20608 converter, DYNATECH Chrome Headers with Egt. Bungs welded under the tubes. THIS CAR IS DELICIOUS!

Delivery can be arranged anywhere. Price and equiptment are NEGOTIABLE - call and make an offer.

If you have questions, or want a detailed list of components, please don't hesitate to contact me personally any time via the contact information below:

1984 Super Stock Camaro:
(Click here) to see another photo. Currently running in SS/BS. MSD 7AL3, RPM Performance Data Recorder, Weld wheels (front and rear), Hoosier Slicks and brand new Hoosier front tires, 40 spline axles, Koni double adjustable shocks and front struts, 2- 16volt batteries, Powerglide trans with 1.98 low gear, ect ect.

Engine: 304ci Patterson Racing Engine. Build approx in 1999. Divinci Carburetor, Hogan Intake, Rons heads, Peterson oil pump.

Car has run 9.44 in Fontana California Div. 7 race. 60 under the index. Can run faster.

An incredible array of tools and toolbox set for a "top level mechanic". This is perfect for someone attending a technical school and about to graduate, or someone establishing a new business. The toolbox itself has been kept very clean, and the tools have all been immaculately kept. Some "no-name" tools are present, but mostly Snap-On, S-K, Matco, and Craftsman. Contents have been hand written, and the pages were scanned. This is until they are all typed out. Please click, read, or print out each page.

Matco 4 Draw Side Box

Full Contents - Page 4 of 4

The party involved in the sale would love to sell everything at once, but if unable, thay may start breaking it up, and selling it individually. The total for the toolboxes, and all the tools comes to just over $40,000. The owner's family is selling it due to a death. The price will begin at $12,000, any reasonable offer may be accepted. They are located in Nassau County / Long Island, New York. Of course, Arrangements can be made to see the complete set. Buyer will be responsible for picking it up, or shipping and handling. Anyone interested or any questions should be directed to E-mail : ToolBox C/O Biondo Racing, no calls on this please. Our employees can not tell you much about it, but if you e-mail us your questions, they will be answered ASAP.

Click to see bigger photos of the box with the drawers closed or drawers open. 1989 Meyers ex-TAD chassis:

Perfect for Fast Brackets. Fully Updated. Regular Money Winner. Set-up for BBC/Glide. 260 wheelbase, Magnesium Dana 60 Floater Style rear, Strange 4.10 gears/spool/solid axles, front/rear wings, Stiletto rack and Spindles, 6gal Alu. cell. Quay Radiayor, Wildwood Brakes, Weld Draglites, Certified till 12/03, All new Aluminum body with Ground effect lip, Beautiful Paint, Must see! Brand new Goodyear 15x33.5 slicks, ChuteMetal chute, Coated Heddman upswept 2 1/4 headers. E-mail for more detailed pics/time slips. Reliable and easy 7 sec ride....Proven winner! Contact **** @ ***-***-****.

$10,000 $8750 rolling less electronics and Ignition

1970 Chevelle Super Sport:

Selling less motor and trans, set up for big block,400 turbo. The car still has all the glass, and can be put back on the street. PA title. $4500.00 in paint alone. Immaculate body. MSD, Strange, & 8 gallon fuel cell.

E-mail Mike for more details, or call him at @ ***-***-**** (Pennsylvania).

$7000

1967 Camaro RS - S/P, S/G, Pro Street:

Just back from a $5,000 paint job and $2,000 Lexan windows. Fiberglass front and deck. New Pro Stars with new Phoenix fronts and rears. 700HP 433 BBC roller motor with aluminum heads. TH400 w/brake and air shifter. New 9" Converter. 12 bolt full floating rear with Richmond pro gears, strange axles and ladder bars. All new front suspension with Flaming River aluminum steering box and Aerospace Engineering disc brakes. New Afco aluminum radiator. New ceramic coated headers. MSD 7AL-2, Pro Power coil and billet distributor. Dedenbear T-Stop and delay box. Dual Optima Batteries. Only 4 runs since completely redone.

$25,000 Invested - $13,500 T/K - $10,500 as roller with TH400 and headers.

S/G Chromoly Firebird (Turn Key)- Carpenter Chassis, updated to 1999.

Turn Key with new "Pat Musi" 509 Motor. New trans, converter, driveshaft, and lexan.

This car has the best of everything, including MSD, Weld, Barry Grant, Strange, Mark Williams center, Harwood, Simpson, Shogun, ACD and Dedenbear.

This car is very clean, and has been owned by two World Champions. Runs 9.0's - all out.

$29,995 or best offer

1993 Ford Mustang Cobra:

#4119 out of #4993. Black, grey leather. Vortech S trim, 30# injectors, 73 C & L. Headers, flows, hurst shifter (5 speed), Griffin alumium radiator, aluminum driveshaft. 3.73 posi. Alpine CD player, code alarm, and Lo jack. Shift tach, boost, water, oil & fuel pressure gauges and a lean/rich meter, Daily driver (has A/C) and proven 11 second qtr car. Can be seen racing at Fun Ford at Houston Raceway Park (TX) on May 4th, 5th and 6th. Contact ********.

$18,500 or trade for rolling door slammer, must be certifiable and 4 link.

1969 S/G or S/ST Corvette- Set up for BBC w/glide or TH400, with driveshafts and crossmembers for both. MSD 7-AL Ignition & Coil. New Painless Wiring & Control Panel, 2 Holley Blue Pumps, Fuel Cell, Griffin radiator, Willwood 4 wheel disc brakes, Moser axles, Strange 4:56 gear with spool, Dana 60, 4-link, 2 sets of Jet-Hot coated headers, Removable nose and doors, Bogart front wheels, Weld Pro Star rear wheels, Quarter Stick shifter, 14x32 Goodyears, Car is certified until 2001, and weighs 2450 without driver, 468ci BBC Block, Rods, pistons, crank, heads, - Needs freshening. Trans Specialties glide, transbrake, deep pan, Sheild - 1.82 Gear set.

For any more information Contact ********

$8,500$7,900 or best offer

1998 S&W 230" 4-link dragster: Pete Biondo's S&W Dragster is For Sale! This car has the best of everything, check out this list: Lots of chrome, powdercoated chassis, Mark Williams Brakes, Strange, Koni, Painless, Goza, Shogun, Davis radiator, 7AL3, Cragar, New Goodyears, VDO, Mega 400, Dual Air Throttle Stop, Air Shifter, Hooker, Borla, 427 Big Block Chevy (30 over) & Completely Fresh!! Runs 8 teens @163, Lunati crank, Manley rods, Jesel belt drive, Moroso aluminum oil pan, Brodix heads, Rupert/ BG alcohol carburetor, BG belt drive fuel pump, ATI trans with 9310 super duty gear set, ATI converter, all the best parts! 2 time $50,000 winner in 2000.

$21,900 complete roller
$23,500 w/trans (super duty gear set) and 8" converter
$28,500 Turnkey and completely fresh (PRICE REDUCED)

1966 Chevelle: tubbed, ladder bar car, all steel except for a 4 inch cowl fiberglass hood, Chevy 468 - Completely fresh & rebuilt - Zero runs, full cage, certified until 2001, this is a race car that looks street, the body on this car is straight as a arrow, must see this car to appreciate!! Aluminum driveshaft, 4 wheel disk brakes, many new parts.

E-mail ******** for more details, questions or more pictures, car has gone best et of 9.95 @ 136 mph. many extras!!!

$15,000 turnkey, or $10,000 less m&t

1977 Chevy Monza- It is a complete backhalf car with ladder bars. It has a nine inch ford rear end with 4.86 richmond gears, strange spool and moser axles. It has full msd ignition, autometer gauges. Quarter stick shifter with air shifter setup. Full roll cage. Set up for SBC and glide. Front fenders, nose, bumper are fiberglass along with the rear bumper. Car weighs 2550 pounds wet. It includes headers, aluminum radiator, and many other pieces.

If you are interested call Jeremy McKague at ***-***-****, Or E-mail ********.

Asking $5,500 - rolling

Return to top of page